|
Name |
Thesis Title |
External Support |
Graduation Date |
|
ABTEW, Mulugeta |
Solder Wicking in Surface Mount Vapor Phase Reflow Soldering |
Amdahl Corp |
Dec 1993 |
|
AGARWAL, Indu |
The Formation of CuxSny Intermetallic Compounds in Controlled Collapse Chip Connections |
Intel Corp |
Aug 1994 |
|
AMOUKTEH, Katherine |
Environmental Compliance Tool |
- |
May 1997 |
|
ANDERSON, Dale |
Effect of Trimodal Particle Size Distribution on Sintering Characteristics of Alumina Powders |
- |
May 1997 |
|
BAJWA, Harjinder |
Optimization of Solder Paste Volume for Tape Ball Grid Array (TBGA) Packages |
Solectron |
Dec 1996 |
|
BIGDELI, Soheil |
Parameters Affecting Surface Resistivity of Microelectronic Interconnects |
National Semiconductor |
Dec 2004 |
|
BUENO, Henry |
Critical Surface Tension of 316L Stainless Steel: Implications for Stent Thrombogenecity |
Advanced Stent Technologies |
May 2003 |
|
BULL, Jeffrey |
Synthesis and Densification of Gel-Derived Powders in the Al2O3-B2O3-SiO2 System |
NASA-Ames |
Dec 1988 |
|
CHANG, Won |
CSP Drop Test Performance for Different Solder Ball Materials |
nVidia Corp |
May 2005 |
|
CHUN, Kay Nam |
Microstructure and Chemistry of Thermal Oxide on Titanium Silicide Thin Films |
- |
May 1996 |
|
CHUNG, Hsiu-Hsin |
Effect of Geometry on Solder Joint Reliability of Leadless Leadframe Package |
National Semiconductor |
May 2003 |
|
DOLAK, Michael |
High Voltage Breakdown Characteristics of Cleaned and Non-Cleaned 304L and 304LMC SST Electrodes |
CPI, Inc. |
May 2003 |
|
DUNLAP, Derek |
Characterization of Anodized Coatings for High-Purity Environments |
Lam Research Corporation |
December 2004 |
|
FOJAS, Paul |
The Influence of Cold Work on the Wettability of Pb-Free Solders on Copper |
- |
Dec 2002 |
|
FONG, Hanson |
Effects of Surface Morphology on the Wetting Behaviors of Electronic Solders |
- |
Dec 2000 |
|
GHULIANI, Neelam |
Societal Cost Methodology |
- |
May 1996 |
|
GOODSON, Keith |
Absorption of Moisture on Thin Carbon Films used as Overcoats for Magnetic Rigid Disks |
- |
Dec 1992 |
|
GREWAL, Balroop |
Sputtered Alumina Film Properties |
Hewlett-Packard |
Dec 1996 |
|
GRILEY, Kristine |
Effect of Sterilization Techniques on Critical Surface Tension of Co-Cr and NiTi |
Guidant Corporation |
Dec 2005 |
|
GUPTA, Ashok |
Effect of Oxidation on Magnetic and Structural Properties of Terbium Containing Magneto-Optical Thin Films |
IBM |
Dec 1992 |
|
HASENKAMP, Erin |
Effect of Surface Finish on Tonal Qualities of Wind Instruments |
- |
May 2003 |
|
IVES, Robert |
An Investigation of Solid State Sintering in Al/Al2O3 Metal Matrix Composites |
- |
Dec 1993 |
|
KIM, Robert |
High Temperature Synthesis of AlN |
- |
Aug 1997 |
|
KWON, Young-Min |
Preparation and Characterization of Sol-gel derived SiO2-TiO2 Thin Films |
- |
Aug 1996 |
|
LANGE, Mary Beth |
Characterization of Ceramic Integrated Circuit Packaging Materials |
- |
Dec 1992 |
|
LEE, Wayne Wong |
Solder Joint Fatigue Modeling |
National Semiconductor |
December 2002 |
|
LEOPOLD, Eric |
Property-Processing Relationships in Linear-Low-Density and High-Density Polyethylene |
Advanced Cardiovascular Systems |
May 1995 |
|
LI, Yanan |
Mechanism of Magnetic Record Head Contamination |
Akashic Memories |
Dec 1997 |
|
McREYNOLDS, Robert |
Stress Corrosion Cracking of Metallic Alloys for Implantable Medical Devices |
- |
Dec 2005 |
|
McWANE, Odell |
Integreity of Rewelded Thin Wall 316L Stainless Steel Tubes |
- |
May 1994 |
|
MOHAMMED, Anwar, A. |
Evaluating Thermally Conductive Epoxies for High Power Applications |
UltraRF |
May 2002 |
|
MOSKITO, John |
Modeling of Thermal Conductivity of Two-Phase Materials Systems |
NASA-Ames |
Aug 1998 |
|
NORDAHL, Robert |
Microbiologically Induced Corrosion |
- |
May 1996 |
|
QUENTIN, Christopher |
Development and Characterization of a Wafer Level Underfill Application Process |
National Semiconductor |
Dec 2000 |
|
RAVISHANKAR, Mandalagiri |
Development of a Computer Integrated Manufacturing Laboratory at San Jose State University |
- |
Jul 1990 |
|
REZIN, Marc |
Reusable Surface Insulation Blanket Flight Test Qualification for Reusable Launch Vehicles |
NASA-Ames |
Dec 2003 |
|
RODRIGUES, Brian |
Effect of Alloying Elements on Electrical Conductivity of Single Phase Alloys |
- |
May 1997 |
|
ROOEIN, Mazdak |
Investigation of the Structure-Property-Processing Relationships of 316L Stainless Steel hypotubing |
Advanced Cardiovascular Systems |
Aug 1995 |
|
SERRANO, Brenda |
Effect of Processing Parameters on the Strength of Silicon Dies |
LSI Logic |
Aug 1998 |
|
SASTRY, Shankar |
Electrical and Mechanical Characterization of Hydrogenated Carbon Films for Rigid Disk Media |
Connor Peripherals |
Sept 1993 |
|
SHIH, Roger |
Investigation of the Zinc-Iron Potential Reversal and its Application to Corrosion in Domestic Hot Water Systems |
- |
Dec 1989 |
|
SHINGAL, Atul |
Reliability Issues and Vibration Testing of Wire Bonds in Ceramic Microelectronic Packaging |
National Semiconductor |
May 1993 |
|
SONG, Jae-Eun |
Wire Bond integrity for Fine Pitch Devices |
National Semiconductor |
June 2000 |
|
STREIB, Ken |
Development of Advanced Guidewires for Angioplasty |
Advanced Cardiovascular Systems |
Dec 1995 |
|
SULAYMONOV, Jamshid |
Effect of Extent of Cure on the Glass Transition Temperature of Epoxy Resins |
- |
May 2004 |
|
TAHERI, Ramtin |
Investigation of Bond Pad Corrosion of Plastic Packaged EEPROM Devices |
Read-Rite |
Nov 1993 |
|
TRIGWELL, Steve |
Corrosion Behavior of Welded Stainless Steel Tubing |
Intel |
Aug 1998 |
|
VERMILLION, Ray |
The Relationship between the Microstructure and Mechanical Properties of 97Pb-3Sn, 95Pb-5Sn and 93Pb-7Sn Alloys |
- |
June 1995 |
|
VIVARES, Valerie |
Effect of Carbon Overcoat on Corrosion Characteristics of Thin Film Magnetic Media |
Akashic Memories |
Aug 1998 |
|
WU, Cheng-Kuan
|
Modeling and Measurement of Solid-Liquid Transformation Enthalpy for Fusible Heat Sink Applications |
NASA-Ames |
Aug 1993 |
|
XU, Danhua |
Carbon Diffusion in YBa2Cu3O7-d Polycrystalline Superconductors |
Argonne National Laboratories |
Dec 1994 |
|
ZOU, Xiaonong |
RF Sputtering of ZrBr2 Thermal Barrier Coatings |
NASA-Ames |
Dec 1993 |
|
ZHANG, Cunzheng |
Effect of CO2 Partial Pressure on Processing of 123 Superconducting Compounds |
Argonne National Laboratories |
Dec 1990 |
|
ZHENG, Ying |
Thickness Measurement of Diamond-Like Carbon by ESCA and AES |
Seagate Technologies |
Dec 2003 |
