Guna S. Selvaduray
CME Department  
 

  1. "Biomedical Devices - Current Developments and Future Trends," Symposium on Roadmaps for Next General Semiconductor Packaging, Sunnyvale, California. (November 17, 2005) (Invited Keynote)

  2. "Effect of Surface Treatment on Surface Characteristics of 316L Stainless Steel," Materials and Processes for Medical Devices Conference, Boston, Massachusetts. (November 14-16, 2005)

  3. "Partnership Building for Disaster Mitigation: Collaboration among Public, Private and Academic Sectors," International Workshop on Emergency Response and Rescue, Taipei, Taiwan. (October 31-November 1, 2005) (Invited)

  4. "Introduction to Biomaterials," Cabrillo College, Aptos, California. (October 24, 2005) (Invited).

  5. "Surface Modifications of Implantable Medical Devices," San Jose State University Biology Department Seminar Series, San Jose, California. (October 12, 2005) (Invited)

  6. "Effect of Surface Modifications on Biocompatibility of Implantable Medical Devices," ASM International, Santa Clara Valley Chapter Symposium, San Jose, California (September 17, 2005) (Invited)

  7. "Pb-Free Solders and their Effectiveness," International Microelectronics and Packaging Society, Northern California Chapter Meeting, Sunnyvale, California. (April 6, 2005) (Invited Luncheon Speaker)

  8. "Nonstructural Earthquake Hazard Mitigation," Certified Emergency Manager Lecture Series II, City of San Jose, San Jose, California. (February 24, 2005) (Invited)

  9. "Nonstructural Hazard Mitigation," Symposium on Best Practices in Risk Reduction for Colleges and Universities, University of Washington, Seattle. (January 27-28, 2005)

  10. "Pb-Free Solders in Microelectronic Assembly," GEM Electronics (Shanghai) Co., Ltd., Shanghai, China. (July 28, 2004) (Invited)

  11. "Sn-Whiskers: Driving Force and Growth Mechanisms," GEM Electronics (Shanghai) Co., Ltd., Shanghai, China. (July 29, 2004) (Invited)

  12. "Developing Collaborative Approaches for Disaster Mitigation," Shizuoka NPO International Forum, Hamamatsu, Japan. (June 19-20, 2004) (Invited)

  13. "Mitigating Disasters," US-Japan Disaster Reduction Forum, Crisis and Environment Management Policy Institute, Tokyo, Japan. (June 17, 2004) (Invited)

  14. "The Collaborative for Disaster Mitigation at San Jose State University," Forum on Emergency Management, Ministry of Land, Infrastructure and Transport (MLIT), Sapporo, Japan. (June 16, 2004) (Invited)

  15. "Mitigating Natural Hazards," Disaster Resistant California 2004 Conference, Sacramento, California. (May 3, 2004) (Invited Keynote Address).

  16. "Biomedical Devices and Biomedical Implants," Symposium on Leading Technologies, College of Engineering, San Jose State University, February 26, 2004. (Invited)

  17. "Natural Disaster Reduction," Forum on Sustainable Development, Asian Civil Engineering Coordinating Council, Taipei, Taiwan, December 4, 2003. (Invited)

  18. "Protecting Laboratory Equipment by Implementing Nonstructural Hazard Mitigation," Seismic Design, Retrofit and Performance of Nonstructural Components in Critical Facilities, ATC-29-2, Applied Technology Council, Redwood City, California, October 23, 2003.

  19. "The Critical Surface Tension of 316L Stainless Steel: Implications for Stent Thrombogenicity," ASM Materials and Processes for Medical Devices Conference, ASM International, Anaheim, California, September 8-10, 2003.

  20. "Microdevice Packaging for Biomedical Applications," Symposium on Package Reliability Issues and Challenges, Microelectronic Packaging and Test Engineering Council, Sunnyvale, California. August 28, 2003. (Invited)

  21. "Effect of Surface Treatment on Performance of Biomedical Implants," Edwards Lifesciences LLC, Irvine, California, August 12, 2003.

  22. "Disaster Mitigation :An Overview," Western Athletic Conference Academic Alliance Symposium, San Jose, California, June 6, 2003.

  23. "Understanding and Minimizing Tin Whiskers :A Review of the Literature," Semiconductor Assembly Council, San Jose, California, June 4, 2003. (Together with Qian Sun.)

  24. "Development of Graduate Level Course on Packaging of Photonic and Optoelectronic Devices," , 53rd Electronic Components and Technology Conference, IEEE-CPMT, New Orleans, May 26, 2003.

  25. "Effect of the Kobe Earthquake on Manufacturing Industries," Business Continuity Workshop, Semiconductor Equipment and Materials Institute, SanJose, California, March 19, 2003. (Invited).

  26. "Utilization of Pb-free solders in MEMS Packaging," Symposium on Reliability, Testing, and Characterization of MEMS/MOEMS, SPIE, January 29, 2003. (Invited)

  27. "The Kobe Earthquake and its Effects on Manufacturing Industries," Business Continuity Planning Conference III, Applied Materials, Inc., Santa Clara, California, November 20, 2002. (Invited)

  28. "The Collaborative Approach to Disaster Mitigation," San Jose North Rotary Club, San Jose, California, October 18, 2002.

  29. "Utilization of Pb-Free Solders in Microelectronics," Metallurgical and Materials Engineering Department, University of Nevada, Reno, Nevada, September 27, 2002. (Invited)

  30. "Translations and Communications," California Seismic Safety Commission, Sacramento, California, September 12, 2002. (Invited)

  31. "Nonstructural Hazard Mitigation Retrofit of an Engineering Laboratory at San Jose State University," Seventh National Conference on Earthquake Engineering, Boston, Massachusetts, July 2002.

  32. "Optoelectronics Packaging Education at San Jose State University," 2nd Annual IEEE Photonic Devices and Systems Packaging Symposium, Stanford, California, July 2002.

  33. "Workshop on Nonstructural Hazard Mitigation," Fires, Floods and Faults Conference - III, CDM, San Jose, California, April 29, 2002.

  34. "Optoelectronic Packaging Education at San Jose State University," Packaging, Assembly & Test in Optoelectronics, MEPTEC, Sunnyvale, California, April 4, 2002.

  35. "Cost Effectiveness of Hazard Mitigation," California Seismic Safety Commission, Sacramento, California, February 14, 2002.

  36. "Effects of the Kobe Earthquake on Manufacturing Industries," San Ramon Valley Rotary Club, San Ramon, California, January 9, 2002.

  37. "Nonstructural Hazard Mitigation," Business Continuity Planning - II, CDM, Sunnyvale, California, November 28, 2001.

  38. "Fractographic Analysis in Strength Testing of Silicon Chips," American Ceramic Society Northern California Section Meeting, Davis, California, November 15, 2001. (Invited)

  39. "Engineering Aspects of Surfaces and Interfaces," Seminar Series in Surface Technology, Department of Applied Sciences, University of Arkansas at Little Rock, October 26, 2001. (Invited).

  40. "Intermetallic Compound Formation in Pb-free Solder Alloy Systems," Third Pb-Free Solders Implementation Summit, MEPTEC, Sunnyvale, California, August 30, 2001. (Invited)

  41. "Public-Private Partnerships For Hazard Mitigation," Disaster Resistant California 2001 Conference, Sacramento, California, June 19, 2001. (Invited)

  42. "The Collaborative Approach: Creating the Collaborative for Disaster Mitigation at SJSU," Joint meeting of the California Emergency Services Association and Business Recovery Managers Association, Dublin, California, May 31, 2001. (Invited)

  43. "Earthquake Hazards and Emergency Management," Disaster Information and Preparedness Center, Shizuoka Topical Symposium, Shizuoka, Japan, March 2, 2001. (Invited)

  44. "Post-Disaster Information and Communications," Science and Technology Agency Symposium, Tokyo, Japan, March 1, 2001. (Invited)

  45. "Corporate Earthquake Programs," CTI Engineering Co., Ltd., Tokyo, Japan. February 26, 2001. (Invited)

  46. "Lead-Free Solders: Overview of Issues," MEPTEC Lead-Free Solders Summit, San Jose, California, January 10, 2001. (Invited)

  47. "The Kobe Earthquake's Economic Effects ," Sunnyvale Rotary Club, Sunnyvale, California, September 24, 2000. (Invited)

  48. "Sintered Architectural Glass Tiles from Recycled Glass," 20th International Association of Packaging Research Institutes Symposium, San Jose, California, June 15, 2000. (Submitted)

  49. "Microelectronic Encapsulation: Polymer Usage and Issues," Golden Gate Polymer Forum, Mountain View, California, June 5, 2000. (Invited)

  50. "Effects of the Kobe Earthquake on Businesses," Fires, Floods & Faults Symposium, Silicon Valley Manufacturing Group, San Jose, California, May 19, 2000. (Invited)

  51. "Materials Issues in Microelectronic Packaging," ASM International, Golden Gate Chapter, Walnut Creek, California, May 10, 2000. (Invited)

  52. "Hazardous Materials and Chemical Incidents during the Hanshin Awaji Earthquake," Hyogo Prefecture Conference, Kobe, Japan, January 12, 2000. (Invited)

  53. "Earthquake Caused Hazmat Incidents: Effects on Response and Recovery ," 6th US-Japan Workshop on Urban Earthquake Hazards, Kobe, Japan, January 1999. (Submitted)

  54. "The Effects of Earthquakes on Industries ," California Emergency Services Association Annual Meeting, Knockti Harbor, California, September 26, 1998. (Invited)

  55. "Earthquake Caused Hazardous Materials Incidents and Lessons Learned," Fourth International Conference on Corporate Earthquake Programs, Shizuoka, Japan, November 12, 1998.

  56. "Earthquake Damage and Hazard Mitigation for Manufacturing Industries," Invited Presentation at California Emergency Services Association Annual Meeting, Konockti Harbor, California, September 24, 1998.

  57. "Effect of the Hanshin-Awaji Earthquake on Manufacturing Industries," Sixth National Conference on Earthquake Engineering, Seattle, Washington, EERI, June 2, 1998. (Submitted)

  58. "Earthquake Emergency Preparedness in California," Invited Presentation at The University of Shizuoka, Shizuoka, Japan, May 8, 1998.

  59. "Effect of The Kobe Earthquake on Manufacturing Industries," Invited Presentation to The California Seismic Safety Commission, San Jose, April 9, 1998.

  60. "Effect of Earthquakes on South Bay Businesses," HAZMACON ?8, Association of Bay Area Governments, Santa Clara, March 31, 1998. (Invited)

  61. "Earthquake Caused Hazardous Materials Incidents at Educational Facilities," Applied Technology Council ATC 29-1, San Francisco, California, January 22, 1998. (Submitted)

  62. "Occurrence of Hazardous Materials Incidents during the Northridge Earthquake of January 17, 1994," Northridge Earthquake Research Conference, CUREe, Los Angeles, California, August 21, 1997. (Submitted)

  63. "Microelectronic Packaging Curriculum Development at San Jose State University", 47th IEEE Electronic Components and Technology Conference, San Jose, California, May 18-21, 1997. (Submitted)

  64. "Earthquakes and Chemicals", Ninth Annual Statewide California Association of Emergency Responders Conference, South San Francisco, California, May 7, 1997. (Invited Luncheon Keynote Address)

  65. "Nonstructural Earthquake Hazard Mitigation", Kaiser Permanente Disaster Preparedness and Safety Conference, Universal City, California, April 8, 1997. (Invited)

  66. "Effect of Flux Type and Surface Coating on the Wetting Force between Copper and Eutectic Pb-Sn Solder", Symposium on Design and Reliability of Solders and Interconnects, TMS Annual Meeting, Orlando, Florida, February 12, 1997. (Invited)

  67. "Earthquake Hazards and Emergency Management - Focus on Chemical and Nonstructural Hazards", Disaster Reduction Seminar Series - Number 2, Sponsored by Ministry of Construction, Sendai, Japan, January 20, 1997. (Invited)

  68. "Great Expectations for Kobe - Implementing Lessons Learned", Kobe Forum of the International Disaster Symposium, Sponsored by Tokyo Metropolitan Government, Kobe, Japan, January 16, 1997. (Invited Keynote Address)

  69. "Use of Phase Diagrams in Board Level Soldering Operations", Solectron Corporation, Advanced Manufacturing Division, Milpitas, California, December 20, 1996. (Invited)

  70. "NiTi Shape Memory Alloys: Effects of Surface Treatment on Surface Chemistry", 32nd American Chemical Society Western Regional Meeting, San Francisco, October 31, 1996. (Together with S. Trigwell, R. D. Hayden, and A. C. Greene) (Submitted)

  71. "Manufactured Products from Recycled Glass", Northern California Section of The American Ceramic Society, San Jose, California, October 16, 1996. (Invited)

  72. "Reducing the Risk of Earthquake Damage to Hospitals", California Healthcare Safety Association, Sacramento, California, September 24, 1996. (Invited)

  73. "Earthquake Hazard Mitigation", Disaster Preparedness Seminar for Health Care Facilities, Los Angeles County Department of Health Services, Alhambra, California, September 12, 1996. (Invited)

  74. "Corrosion of Magnetic Recording Media", Akashic Memories Corporation, San Jose, California, August 27, 1996. (Invited)

  75. "Fluxless Soldering", Solectron Technical Center, Solectron Corporation, Milpitas, California, August 21, 1996. (Invited)

  76. "Earthquake Caused Equipment Damage", Hewlett Packard California Analytical Division Monthly Safety Seminar, Palo Alto, July 16, 1996. (Invited)

  77. "Developing Recycling Curriculum", California Resource Recovery Association, 20th Annual Meeting, Newport Beach, California. June 16, 1996. (Invited)

  78. "Design for the Environment", California Resource Recovery Association, 20th Annual Meeting, Newport Beach, California. June 17, 1996. (Invited)

  79. "Corporate Earthquake Preparedness", Disaster Preparedness and Information Center, Shizuoka Prefecture, Special Seminar Series, Shizuoka, Japan, May 24, 1996. (Invited)

  80. "Earthquake Preparedness in California", Shizuoka Prefectural University, Emergency Preparedness Lecture Series, Shizuoka, Japan, May 23, 1996. (Invited)

  81. "Earthquake Hazard Mitigation for Manufacturing Industries", Osaka Science and Technology Center Lecture Series, Osaka, Japan, May 22, 1996. (Invited)

  82. "Japan and USA as seen through Earthquake Programs", Osaka Civil Engineering Works Foundation Seminar, Osaka, Japan, May 20, 1996. (Invited)

  83. "Public and Private Sector Cooperation in Crisis Management", Teleport '96 Conference, Tokyo, Japan, May 15, 1996. (Invited)

  84. "Developing Industry-Academia Partnerships", Society of Research Administrators, Western Regional Annual Meeting, Lake Tahoe, California, April 15, 1996. (Submitted)

  85. "Materials Aspects of Earthquake Induced Damage", ASM International, New Jersey Chapter, Amboy, New Jersey, March 29, 1996. (Invited)

  86. "Occurrence of Hazardous Materials Incidents and Fires during The Kobe Earthquake", Industrial Emergency Council Annual Meeting, San Carlos, California, May 9, 1995. (Invited)

  87. "Effect of the Kobe Earthquake on Industries and Businesses", Southern California Emergency Services Special Symposium on The Kobe Earthquake, Santa Monica, California, April 4, 1995. (Invited)

  88. "Occurrence of Hazardous Materials Problems during Earthquakes", Earthquake Preparedness for Hospitals Seminar, Hospital Council of Northern California, San Jose, California, January 24, 1995. (Invited)

  89. "Future Directions in Microelectronic Packaging", Invited Panel Member at Fabless Semiconductor Association's monthly meeting - San Jose, California, December 6, 1994. (Invited)

  90. "Processing-Properties Relationships in High-Lead Solders", Sixth Annual Research Review, Colleges of Engineering & Science, San Jose State University, San Jose, California, November 16, 1994. (Submitted)

  91. "Encapsulation and Packaging of Microelectronic Devices", Bank Industry Malaysia Seminar Series, Kuala Lumpur, Malaysia, August 18, 1994. (Invited)

  92. "The Northridge Earthquake: Damage Patterns and Chemical Incidents", Special presentation sponsored by the Shizuoka Prefectural Government, Shizuoka, Tokyo, July 30, 1994. (Invited)

  93. "Chemical and Hazardous Materials Incidents during the Northridge Earthquake", Japan Information Society Seminar Series, Tokyo, Japan, July 28, 1994. (Invited)

  94. "Recycled Glass: Development of Market Potential", Pacific Recyclers' Exposition, Association of Bay Area Governments, San Jose, California, March 30, 1994. (Invited)

  95. "Nonstructural Hazard Mitigation", 1994 Hospital Disaster Management Conference, Hospital Council of Southern California, Los Angeles, March 23, 1994. (Invited)

  96. "Earthquake Caused Chemical Incidents", Second US-Japan Conference on Corporate Earthquake Programs, Tokyo, Japan, November 8-10, 1993. (Submitted)

  97. "Modeling of Fusion Enthalpy of Aqueous Solutions", Fifth Annual Research Review, Colleges of Engineering & Science, San Jose State University, San Jose, California, October 27, 1993. (Submitted)

  98. "Evaluation of Thermal Shock Test Methods for Ceramic Packages", 8th Electronic Materials & Processes Conference, ASM International, San Jose, California, August 1993. (Submitted)

  99. "Solder Wicking in Surface Mount Vapor Phase Reflow Processes", 8th Electronic Materials & Processes Conference, ASM International, San Jose, California, August 1993. (Submitted)

  100. "Role of CuxSny Intermetallics in the Reliability of Controlled Collapsed Chip Connection (C4)", 8th Electronic Materials & Processes Conference, ASM International, San Jose, California, August 1993. (Submitted)

  101. "Nonstructural Hazard Mitigation for Schools", School Sites: Becoming Prepared for Earthquakes, Sponsored by City of San Jose, October 6, 1992. (Invited)

  102. "Fusible Heat Sink Materials: Evaluation of Alternate Candidates", 22nd International Conference on Environmental Systems, Seattle, Washington, July 13-16, 1992. (Submitted)

  103. "Intermetallic Compound Formation in Flip Chip Bonding", Third Annual Symposium on Current Issues in Microelectronic Packaging, San Jose State University, San Jose, California, June 18-19, 1992. (Invited)

  104. "Corrosion Behavior of Condenser Tube Materials at the Geysers Power Plant: A Status Report", American Electroplaters & Surface Finishers Society, Santa Clara Valley Branch, Monthly Meeting, May 27, 1992, Santa Clara, California. (Invited)

  105. "Intermetallic Compound Formation in the Au-Cu-Sn System", Seminar presented at VLSI Technology, Inc., San Jose, California, May 14, 1992. (Invited)

  106. "Nonstructural Hazard Mitigation, Risk Management, Cost Benefit Analysis & Loss Prevention Techniques and Basis for Evacuation Decision", Earthquake Preparedness Symposium for Hospitals, Sponsored by Office of Emergency Services - Region VI, April 23-24, 1992, Palm Springs, California. (Invited)

  107. "Earthquakes and Hazardous Materials Releases", Earthquake Preparedness for Hospitals, Sponsored by Hospital Council of Northern and Central California, April 1-2, 1992, Oakland, California. (Invited)

  108. "Nonstructural Hazard Mitigation: Risk Assessment, Cost Benefit Analysis and Loss Prevention Techniques", Symposium on Earthquake Preparedness for Health Care Facilities, Sponsored by County of Orange, March 11-12, 1992, Costa Mesa, California. (Invited)

  109. "Microelectronic Packaging: The Formulation of an Academic Curriculum at SJSU", Invited Keynote Address at the Fourth International Tape Automated Bonding Symposium, February 17, 1992, San Jose, California. (Invited)

  110. "Earthquake Education at the Elementary School Level", Poster presentation at the Earthquake Engineering Research Institute Annual Meeting, February 5-8, 1992, San Francisco, California. (Submitted)

  111. "Aluminum Nitride: A Commodity Study of a Synthetic Compound", 44th Pacific Coast Regional Meeting of the American Ceramic Society, October 31-November 2, 1991, San Diego, California. (Submitted)

  112. "Hazardous Materials Incidents Related to the 1989 Loma Prieta Earthquake", Santa Clara County Emergency Managers Association, Monthly Meeting, September 19, 1991, Los Gatos, California. (Invited)

  113. "Materials Selection Parameters for Ceramic Substrates: Property Processing Relationships", 4th Electronic Materials & Processing Conference, Montreal, Canada, August 19-22, 1991. (Submitted)

  114. "Fusible Heat Sink Materials: An Identification of Alternate Candidates", 21st International Conference on Environmental Systems, San Francisco, California, July 15-18, 1991. (Submitted)

  115. "Ceramics of Low Flaw Content: Trimodal Powder Distribution in Sintering", Seminar presented at Raychem Corporation, Menlo Park, California, June 1991. (Invited)

  116. "Aluminum Nitride: An Engineering Commodity Study", Second Annual Symposium on Current Issues in Microelectronic Packaging, San Jose State University, May 18-19, 1991, San Jose, California. (Invited)

  117. "Seismic Safety from an International Perspective", Seismic Controls Symposium, Organized by The Santa Clara County Fire Chiefs Association, November 1, 1990, San Jose, California. (Invited)

  118. "Effect of CO2 on the Processing of Y-Ba-Cu-O Superconductors", Second Annual Review of Engineering Research, San Jose State University, October 25, 1990, San Jose, California. (Submitted)

  119. "Effect of Porosity on the Properties of Ceramic Substrates", Symposium on Current Materials Issues in Microelectronic Packaging, San Jose State University, San Jose, California, May 1990. (Invited)

  120. "Earthquake Hazard Reduction: Hazardous Materials and Glass Problems", First Annual Review of Engineering Research, San Jose State University, San Jose, California, October 1989. (Submitted)

  121. "Environmental Pollution: Is Recycling the Answer?", Invited presentation at the Tenth Caribbean Insurance Conference, Antigua, West Indies. September 1989. (Invited)